Welds 24 gauge - 3/16 in. (0.8-4.8mm) mild steel. Uses 120V power.

FEATURES:

Auto-Set™

A breakthrough control that automatically sets your welder to the proper parameters. Auto-Set offers all-in-one MIG minus the hassle of finding parameters. Simply set the wire diameter, set the material thickness, and start welding!

Angled All Aluminum Drive System

Robust wire drive with Quick Select™ drive roll and calibrated tension knob creates consistant feeding and easy setup for up to 15-foot MIG guns.

120V Input Power

Uses 120V household input power so there is no special power requirements. Flexible to use in any location!

Auto Spool Gun Detect™

Automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.

Quick Select™ Drive Roll

Makes setup quicker by offering three grooves - two for different size solid wire and a third for flux-cored wire.

Manual Mode

Gives you the flexibility to manually set the machine when welding aluminum, stainless steel or anytime you want to set your own parameters on mild steel.

Thermal Overload & 'Tip Saver' Short Circuit Protection

Shuts down the unit and activates the over-temperature light if the airflow is blocked or duty cycle is exceeded. Tip Saver shuts down output when the tip is shorted to the work extending tip life and protecting internal components from damage.

WHAT'S INCLUDED

Millermatic 141

6.5-ft. (2 m) power cord with plug

10-ft. (3 m) M-100 MIG gun and cable assembly

10-ft. (3 m) work cable with clamp

Argon and AR/CO2 mix flow gauge regulator with gas hose

Hobart® spool of .030-in. (0.8 mm) solid wire

Quick Select drive rolls for .024-in

(0.6 mm) or .030/.035-in. (0.8/0.9 mm) solid wire, and .030/.035-in. (0.8/0.9 mm) flux-cored wire

Two contact tips for .030-in. (0.8 mm) wire

Material thickness gauge (#229 895)

Hook-and-loop cord wraps

NOT INCLUDED

Shielding gas for welding with solid wire (GMAW)

Spool Gun for welding aluminum

Personal safety products (helmet, gloves)

Small running gear/cylinder rack

PROCESSES

MIG (GMAW)

Flux Cored (FCAW)

INPUT VOLTAGE: 110/115/120 V

RATED OUTPUT: 90 Amps at 18.5 VDC, 20% duty cycle

WIRE FEED SPEED: 15 IPM - 360 IPM
0.4 m/min - 9.1 m/min

WIRE DIAMETER:

Solid Steel 0.024 in 0.03 in
Solid Steel 0.6 mm 0.8 mm
Stainless 0.024 in 0.03 in
Stainless 0.6 mm 0.8 mm
Flux Cored 0.03 in 0.035 in
Flux Cored 0.8 mm 0.9 mm

NET WIDTH: 11.25 in

NET HEIGHT: 12.5in

NET LENGHT: 20.5 in

NET WEIGHT: 51 lbs

WARRANTY MILLER TRUE BLUE

Mig

MILLERMATIC 141 MIG WELDER

MILLERMATIC 141 MIG WELDER

Navigate

Community

Support

Follow us

Subscribe