Welds 24 gauge - 3/16 in. (0.8-4.8mm) mild steel. Uses 120V power.

 

FEATURES:

Auto-Set™
A breakthrough control that automatically sets your welder to the proper  parameters.  Auto-Set offers all-in-one MIG minus the hassle of finding parameters.  Simply set the wire diameter, set the material thickness, and start welding!
Angled All Aluminum Drive System
Robust wire drive with Quick Select™ drive roll and calibrated tension knob creates consistant feeding and easy setup for up to 15-foot MIG guns.
120V Input Power
Uses 120V household input power so there is no special power requirements.  Flexible to use in any location!
Auto Spool Gun Detect™
Automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.
Quick Select™ Drive Roll
Makes setup quicker by offering three grooves - two for different size solid wire and a third for flux-cored wire.
Manual Mode
Gives you the flexibility to manually set the machine when welding aluminum, stainless steel or anytime you want to set your own parameters on mild steel.
Thermal Overload & 'Tip Saver' Short Circuit Protection
Shuts down the unit and activates the over-temperature light if the airflow is blocked or duty cycle is exceeded.  Tip Saver shuts down output when the tip is shorted to the work extending tip life and protecting internal components from damage.

WHAT'S INCLUDED

  • Millermatic 141
  • 6.5-ft. (2 m) power cord with plug
  • 10-ft. (3 m) M-100 MIG gun and cable assembly
  • 10-ft. (3 m) work cable with clamp
  • Argon and AR/CO2 mix flow gauge regulator with gas hose
  • Hobart® spool of .030-in. (0.8 mm) solid wire
  • Quick Select drive rolls for .024-in
  • (0.6 mm) or .030/.035-in. (0.8/0.9 mm) solid wire, and .030/.035-in. (0.8/0.9 mm) flux-cored wire
  • Two contact tips for .030-in. (0.8 mm) wire
  • Material thickness gauge (#229 895)
  • Hook-and-loop cord wraps

    • NOT INCLUDED

  • Shielding gas for welding with solid wire (GMAW)
  • Spool Gun for welding aluminum
  • Personal safety products (helmet, gloves)
  • Small running gear/cylinder rack

    •  

    PROCESSES

    MIG (GMAW)
    Flux Cored (FCAW)
    INPUT VOLTAGE:  110/115/120 V
    RATED OUTPUT: 90 Amps at 18.5 VDC, 20% duty cycle
    WIRE FEED SPEED: 15 IPM - 360 IPM
    0.4 m/min - 9.1 m/min
    WIRE DIAMETER: 
    Solid Steel 0.024 in 0.03 in
    Solid Steel 0.6 mm 0.8 mm
    Stainless 0.024 in 0.03 in
    Stainless 0.6 mm 0.8 mm
    Flux Cored 0.03 in 0.035 in
    Flux Cored 0.8 mm 0.9 mm
    NET WIDTH:  11.25 in
    NET HEIGHT: 12.5in
    NET LENGHT: 20.5 in
    NET WEIGHT: 51 lbs
    WARRANTY  MILLER TRUE BLUE 

    Questions & Answers

    Have a Question?

    Be the first to ask a question about this.

    Ask a Question

    Recommended consumables for this equipment

    Related items that can be used with MILLERMATIC 141 MIG WELDER