Multimatic 200 Multiprocess Welder

MIL-907518 - MILLER
In stock

'Lightweight MIG, Stick and TIG welder. Impact-resistant case provides durability on the job. This all-in-one multiprocess welder connects to 120 or 230 volt input power. Welds up to 3/8” mild steel'




  • Multimatic 200
  • Multimatic 200 TIG Kit #301287
  • RFCS-6M Foot Control - 13.25-ft.
  • 10-ft. (3 m) Bernard® Q150 MIG gun
  • 13-ft. (4 m) lead with electrode holder
  • 10-ft. (3 m) work lead with clamp and 25-mm Dinse connector
  • Power cord and MVP plugs for 120 and 240 V
  • Argon and AR/CO2 mix regulator/flow gauge with 12-ft. (3.7 m) hose
  • Quick Select™ drive roll for .024 in (0.6 mm) or .030/.035 in (0.8/0.9 mm) solid wire, and .030/.035 (0.8/0.9 mm) flux cored wire
  • Two contact tips for .030-in. (0.8 mm) wire, and two contact tips for .035-in. (0.9 mm) wire
  • Material Thickness Gauge #229895
  • Information/settings chart and quick setup guide

    Multiprocess Capabilities
    MIG, flux-cored, DC stick and DC TIG processes, allowing you to build your skills.
    Auto-Set™ Elite
    Auto-Set Elite can be used on multiple materials and multiple processes with the ability to fine-tune your settings. Simple to set up and use!
    Inverter Technology
    Inverter technology combines best-in-class arc characteristics with the portability of a 29-pound machine. The arc is extremely forgiving to variations in arc length and travel speeds.
    Ultimate Durability
    The Multimatic 200's impact-resistant case provides strength and durability, protecting the internal components and welding wire.
    Excellent arc characteristics!
    Multimatic 200 offers positive arc starts and an extremely stable arc with minimal spatter on both mixed gases and straight CO2.
    Plugs in Anywhere!
    Multi-voltage plug (MVP™) allows you to connect to common 120 or 230 V power receptacles without the use of any tools—choose the plug that fits the receptacle and connect it to the power cord.
    Simple Aluminum Solution
    Direct-connect spool guns are a reliable and economical solution for welding aluminum.
    TIG Contractor Kit
    The Multimatic 200 TIG Contractor Kit gives you everything you need for remote TIG welding with the Multimatic 200.
    Miller's Fan-On-Demand technology operates only when needed reducing noise, power consumption and the amount of airborne contaminants pulled through the machine.
    Miller's Auto-Line Technology
    Provides state-of-the-art flexibility, automatically connecting to 115 or 230 VAC, single-phase power without removing the cover to re-link the power source. See how it works.  


  • Shielding gas for welding with solid wire (GMAW)
  • Spool Gun for welding aluminum
  • Small Running Gear/Cart
  • Welding Wire
  • Personal safety products (helmets, gloves)


    Flux Cored (FCAW)
    MIG (GMAW)
    Stick (SMAW)
    TIG (GTAW)


    Title Multimatic 200 Multiprocess Welder
    Industries Interests Racing / Customizing / Restoring
    DIY / Home Hobbyist
    Farm and Ranch
    Metal Art / Sculptures
    Weldable Metals Stainless Steel
    Input Voltage 110/115/120 V 
    220/230/240 V
    Input Phase 1-Phase
    Input Hz 50 / 60 Hz
    Current Type DC
    Max Open Circuit Voltage 90 VDC
    Wire Feed Speed 1.8 m/min - 10.8 m/min
    70 IPM - 425 IPM
    Net Width 9.75 in
    Net Height 14.5 in
    Net Length 17 in
    Net Weight 29 lbs
    Warranty Miller's True Blue Warranty
    Portability Handle(s)
    Weld Output CC / CV

    Questions & Answers

    Have a Question?

    Be the first to ask a question about this.

    Ask a Question